Table of Contents
Advertisement
Summary for everyday use
Switching on and off
Switch the receiver on by pressing the On/Standby key on the front panel of the
>
receiver, or on the remote control unit
>
Press the key again, either on the front panel of the receiver or on the remote control,
to switch the receiver off.
>
The receiver is now in standby mode, and the display will show the current time.
In order to disconnect the receiver completely from mains power supply, switch off the
mains power switch on the back panel of the receiver. Switch on again via the same
switch to reconnect to the mains power supply.
Selecting a programme/channel
Using the up/down arrow keys
You may use the up/down arrow keys, either on the receiver or on the remote con-
>
trol, to move up or down the selected programmes/channels one step at a time.
Using the numeric key pad
>
Use the numeric keys to directly enter the number of the programme/channel you
wish to view. For instance
1
1, then 4
2, then 3, then 4
When entering programme/channel numbers with more than one digit, you have approx. 3
seconds after pressing the last key to continue with the entry.
If you are entering a channel number with only one or two digits, we recommend you press
the OK key after entering the digit(s) in order to speed up the process.
Using the programme/channel list
Press the key List.
>
A list of programmes will be displayed.
When operating in TV mode, a list of TV programmes only will be displayed, when operating
in Radio mode, a list of radio programmes only will be displayed. The programme/channel
currently selected will be displayed in red.
You can now proceed to select a programme by using the up/down arrow keys;
>
the selected programme will be displayed in blue.
Press the OK key for the selected programme to be viewed.
>
The up/down arrow keys allow you to scroll through the programme list one entry
>
at a time.
The left/right arrow keys allow you to page through the programme list one page
>
at a time.
Volume adjustment
You have the facility to adjust the volume directly in your receiver, as opposed to adjusting
this via your TV set controls. This makes operation even more convenient, as you now have
all important functions combined on one remote control unit, and will have to use the remote
control of your TV set only very rarely.
Use the Volume + key to increase the volume of your receiver, and the Volume -
>
key to reduce the sound volume.
Press the Sound on/off key to mute the sound completely. Pressing the same key
>
again will restore the sound.
Get user manuals:
See SafeManuals.com
for programme slot 1
for programme slot 14
for programme slot 234
46
Advertisement
Table of Contents
