Table of Contents
Advertisement
6. Recovering Back to Default Configuration
To reset the IP address to the default IP address "192.168.0.100"
and the user password to factory default mode (default password
is admin), press the hardware reset button on the front panel for
about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx
and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
Figure 6-1: IGS-5225-4T2S Reset Button
P1
P2
Alarm
Ring
R.O.
Reset
115200,N,8,1
1G/2.5G
LNK/ACT
6
5
100
LNK/ACT
Reset
17
Advertisement
Table of Contents
