Table of Contents
Advertisement
3
Installation and Configuration
3.4 Installing on level shelves
(1) Apply the supplied rubber feet onto the bottom surface of the unit.
(2) Install in a level area.
Caution
- Do not stack and use.
Set up with a clearance of
20 mm or more.
3.5 Mounting to rack
Take out the supplied 2 mounting brackets (for 19-inch rack) and 8 screws (for fixing
the main unit and the mounting bracket), and fix the brackets to the main unit by
tightening screws into 4 holes located at the sides. Then, mount this Ethernet Switch
firmly to the rack using the supplied 4 screws (for 19-inch rack) or screws furnished
at the rack.
The main unit can be placed 20 mm back on the rack by changing the bracket fixing
position.
20
Bottom surface
20 mm
Rubber feet
Advertisement
Table of Contents
