Installation; Installing The Control Panel - Panasonic AV-HS450N Operating Instructions Manual

1. Installation

1-1. Installing the control panel

Follow the instructions set forth in "Safety precautions" and also observe the
cautionary items below.
Be absolutely sure to ask your dealer to do the jobs of installing and connecting the panel.
Connecting the power supply
p Use within AC 100 V to 120 V.
p Be absolutely sure to use only the power cord and AC adapter supplied with the
panel.
p Be absolutely sure to connect the grounding terminal of the power cord to
ground.
Also connect the ground terminal (SIGNAL GND) at the rear of the panel to the
system ground.
p If only one AC adapter is to be connected, place the dust-proof cap over the DC
power input socket that is not going to be used.
p To prevent the DC plug from being disconnected, secure the cable of the AC
adapter to the cable clamp.
p When the control panel is not going to be used for a prolonged period of time,
turn off its power, and disconnect the power plug from the AC outlet.
Handle the control panel carefully!
p Dropping the control panel or subjecting it to strong impact or vibration may cause trouble and/or malfunctioning.
Do not allow any foreign objects to enter inside the control panel!
p Allowing water, metal items, scraps of food or other foreign objects inside the control panel may cause a fire
and/or electric shocks.
Choosing the best installation location
p This unit is designed for indoor use only.
p Install the unit on a sufficiently strong, stable and level
surface for use.
p Ensure a space of at least 100 mm (3-15/16˝) around
the rear vents to avoid obstructing ventilation.
In particular, ensure sufficient space between
ventilation and wiring when using mounted in a panel
or table.
p Do not install the panel in a cold place where the
temperatures will drop below 0 °C (32 °F) or in a hot
place where the temperatures will rise above 40 °C
(104 °F).
p Avoid installing the panel where it will be exposed to
direct sunlight or to the hot air that is blown out from
other products.
p Installing the panel in a very humid, dusty or vibration-
prone location may give rise to trouble.
POWER
ALARM
10
Dust-proof cap
Cable clamp
Ventilation holes
Multi-format Live Switcher AV-HS450