Panasonic ZEQUO 4600RE Installation Manual page 4

Do not connect any other devices except for 10BASE-T/100BASE-TX/1000BASE-T

devices to the twisted pair ports.
Deviation could lead to equipment failure.
Use only the separately sold SFP module

(PN54021K/PN54023K/PN54022/PN54024) for the SFP expansion ports, and
use only the separately sold SFP module
(PN54021K/PN54023K/PN54022/PN54024), or SFP+ module
(PN59021/PN59023) for the SFP+ expansion ports, and use only the included
40G direct attach cable for the stack ports, and do not insert anything else
besides these.
Deviation could lead to malfunction.
Check the website for the latest information on which SFP modules are compatible.
Do not insert nor use any other modules except for our optional FAN02

Module (PN73002) into the fan module slots.
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Do not insert nor use any other modules except for our optional RP02-200W

Module (70002) into the power module slots.
Deviation could lead to electric shock, malfunction, and/or equipment failure.
Be sure to check the precautions which are printed on the product labels

before using.
Deviation could lead to electric shock.
 Use the bundled power cord (AC 100 – 240 V specifications).
Deviation could lead to electric shock, malfunction, and/or equipment failure.
 Unplug the power cord in case of equipment failure.
Deviation, such as keep connecting for a long time, could lead to fire.
Be sure to connect the ground cable.

Otherwise this might cause electrical shocks, misoperations and malfunctions.
Connect the Ethernet Switch via the supplied power cord to the outlet which is
connected to the ground.
If the outlet is not connected to a ground, connect the ground cable to the ground
terminal screw.
 Connect the power cord firmly to the power port.
Deviation could lead to electric fire, shock, and/or malfunction.
 If the STATUS LED is blinking in orange (systemt fault), check for the cause
via the system log, since it might be a malfunction if it is not the temperature,
loop detection and shutoff, unplug the power plug.
Deviation, such as keep connecting for a long time, could lead to fire.
Handle the Ethernet Switch carefully to prevent fingers and hands from being

damaged by twisted pair port, SFP extension slot, Stacking port, console port,
SD card slot, or power cord hook block.
4
CAUTION