Camera Setup; Registration - Idis DP-DD1316 Operation Manual

Part 3 - Configuration

Camera Setup

Refer to the Menu Use on page 19 for basic information
on using the Setup menus.

Registration

Register a camera on this page. Click the Expert button to
save camera list information in a CSV file format on USB.
• A column indicates camera number, B
column the camera MAC address, C column
the Video In port of the video encoder in the
.csv file. C column indicates only for video
encoders. If camera information displays
as follows: 5,00:11:22:18:30:20,3, 5 = CAM 5,
5,00:11:22:18:30:20 = MAC address, 3 means
video encoder.
• Before using this feature, the cameras
must be scanned first. If the cameras to be
registered
do not exist in the list, the camera cannot be
registered.
• This feature is not supported for the third-
party cameras.
24
Scan :
You can scan for the IDIS protocol camera to connect to
the video decoder by pressing Scan button on Camera >
Registration page. To register a camera, select the camera you
want from the list and then select Device Register button.
Click on Import button to import a camera information file in a
.csv file format . The user can edit the .csv file directly.