Main Monitor; Cvbs - Idis DP-DD1316 Operation Manual

Part 3 - Configuration

Main Monitor

Configure settings related to main monitor.
• Mode: Select Full Sequence or Cameo Sequence.
• Interval: Select between 3 secs and 2 mins. For more
information on Sequence, refer to the Full Sequence on
page 16.
• Event Monitoring On: Enable Event Monitoring On. A
camera screen with event detection enabled is displayed
when an event occurs. Select between 5 secs and 5 mins.
For more information on Event Monitoring, refer to the
Event Monitoring on page 18.
• Manual Configuration: Set the resolution manually
regardless of the resolution supported by the monitor.
• Resolution: Select 3840 x 2160, 1920 x 1200, 1920 x 1080,
1680 x 1050, 1600 x 1200.
3840 x 2160 resolution is supported only in HDMI
2.0 monitor, in which case the VGA output will
display at 1920 x 1080.
28

CVBS

Configure settings related to CVBS.
• Signal: Select the analog video type outputted to CVBS,
NTSC or PAL.