Idis DP-DD1316 Operation Manual page 18

Part 2 - Getting Started
• Aspect Ratio: Select whether to enable the original
aspect ratio of video transmitted from the camera.
5 Sequence
Initiates Sequence while in Live mode. To exit, select
Sequence once more. The
lower left part of the screen while Sequence is in progress.
16
icon is displayed on the
Full Sequence
Displays all channels in sequence while in Live mode (single and
split screen settings). In order to use the Full Sequence feature,
Full Sequence (Display Setup - Main Monitor > Sequence) must
first be enabled.
e.g.) Full Sequence in 2x2 split screen mode
Cameo Sequence
In Cameo Sequence mode, only the bottom right screen in a
split screen setup changes sequence. In order to use the Cameo
Sequence feature, Cameo Sequence (Display Setup - Main
Monitor > Sequence) must first be enabled.
e.g.) Cameo Sequence in 2x2 split screen mode
• If using the Full Sequence setting, page numbers
appear on the system status area on the lower left part of
the screen, next to the Sequence icon.
• Pages are skipped under the following circumstances:
– If all cameras included in the page are deactivated.
– If there are no video signals.
– If the user does not have permission to view feeds
from the cameras.
6 Select Camera
Displays the selected camera in a single screen format.
7 Setup
Used to access the Setup menu.
8 Status Indication
Displays system status icons.
Status Indication
Indicates Sequence is in use.
1/4
Indicates the current screen's group.
Indicates an event monitoring.