Table of Contents
Advertisement
PTZ Control
While in Live mode, right-click on the mouse on the camera
screen and select PTZ from the context menu.
If the selected channel is a PTZ camera, selecting PTZ from the
context menu will be changed into PTZ mode immediately.
However, if the clicked channel is not a PTZ camera, the menu
will be disabled.
The
icon will begin to flash on the selected camera's OSD
window.
Use the Arrow buttons to pan and tilt the camera up, down, left,
and right.
You can also change the direction by dragging on the mouse.
Also, it's possible to use the mouse wheel to zoom in/out.
• Logging in with an account that has PTZ Control
Authority is necessary in order to control PTZ cameras.
• To exit PTZ mode, right-click on the mouse, open up the
Context Menu and then select the PTZ exit.
While in PTZ mode, place the mouse pointer close to the bottom
edge of the screen to display the PTZ Tools window.
Moving a PTZ preset
While in the PTZ Tools window, select the
Move to Preset window. Select a preset to move the current PTZ
camera to the selected preset's position.
Advanced Settings
In PTZ mode, selecting a camera and then right-clicking on the
right loads the Advanced PTZ screen as shown below. This menu
lists Speed, Auto Pan, and other advanced PTZ camera control
options available for the camera. Options that are not available for
the selected PTZ camera remain inactive.
You can use the mouse to control PTZ cameras. Left-click
on the mouse and drag to move the camera in the desired
direction and use the mouse wheel to zoom in/out.
Part 2 - Getting Started
icon to display the
17
Advertisement
Table of Contents
