Table of Contents
Advertisement
8.2: Advanced parameters
The device allows to customize its operation to user's needs using
configurable parameters.
The settings can be adjusted via Z-Wave controller to which the de-
vice is added. The way of adjusting them might differ depending on
the controller.
In the FIBARO interface parameters are presented as simple options
in Advanced Settings of the device.
Available parameters:
13.
Description
Parameter size 1B
Default value
Available
values
20.
Description
Parameter size 1B
Default value
Available
values
LED frame – brightness
This parameter allows to adjust the LED frame
brightness.
100 (100%)
0 – LED disabled
1-100 (1-100% brightness)
Operation mode
This parameter defines operation of the device.
Choose the mode depending on the type of the
device you want to control remotely
0 (scene controller)
0 – scene controller mode
1 – double button mode
2 – single button mode
3 – switch controller mode
4 – dimmer / roller shutter controller mode
5 – roller shutter controller mode (step-by-step)
6 – venetian blinds controller mode
(step-by-step)
21
confIguratIon
Advertisement
Table of Contents
