Table of Contents
Advertisement
Chapter 4: BIOS
4.4 IPMI
This tab allows you to configure the following IPMI settings for the system.
Use this feature to configure Intelligent Platform Management Interface (IPMI) settings.
BMC Firmware Revision
This item indicates the IPMI firmware revision used in your system.
IPMI Status
This item indicates the status of the IPMI firmware installed in your system.
FRB-2 Timer
Use to enable or disable the FRB-2 timer (POST timer).
FRB-2 Timer Timeout
Enter a value between 3 and 6 minutes for FRB-2 timer expiration.
FRB-2 Timer Policy
Configure how the system should respond if the FRB-2 timer expires. Not available of the
timer is disabled. Options are Do Nothing, Reset, Power Down, and Power Cycle.
69
Advertisement
Table of Contents
