Supermicro H12SSG-AN6 User Manual page 75

SMCI Security Erase Configuration
This submenu allows the user to configure the following Key Management settings.
Security Function
This setting determines the security of the password. Options are Disable, Set Password,
Security Erase - Password, Security Erase - PSID, and Security Erase - Without Passord.
Password
This setting allows you to set the password.
Secure Boot
This section contains options and menus for securing your boot mode and for key management.
Secure Boot
This option allows you specify when the Platform Key (PK) is enrolled. When enabled, the
System Mode is user deployed, and the CSM function is disabled. Options include Enabled
and Disabled.
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are Disabled
and Enabled.
Enter Audit Mode
This submenu allows the user to enable audit.
Key Management
This submenu allows the user to configure the following Key Management settings.
Vendor Keys
Provision Factory Defaults
Select Enabled to install the default Secure-Boot keys set by the manufacturer. The options
are Disabled and Enabled. The options include Disabled and Enabled.
Restore Factory Keys
Select Yes to install all default secure keys set by the manufacturer. The options are Yes and No.
75
Chapter 4: BIOS