Sunell SN-TPC4203AT User Manual
  1. Manuals
  2. Brands
  3. Sunell Manuals
  4. Security Camera
  5. SN-TPC4203AT
  6. User manual

Sunell SN-TPC4203AT User Manual

Thermal imaging box network camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal Imaging Integrated Network Camera
User Manual
Issue
V1.1
Date
2021-07-26

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN-TPC4203AT and is the answer not in the manual?

Questions and answers

Related Manuals for Sunell SN-TPC4203AT

Summary of Contents for Sunell SN-TPC4203AT

  • Page 1 Thermal Imaging Integrated Network Camera User Manual Issue V1.1 Date 2021-07-26...
  • Page 3 Thermal Imaging Box Network Camera User Manual Precautions Precautions Precautions Fully understand this document before using this device, and strictly observe rules in this document when using this device. If you install this device in public places, provide the tip "You have entered the area of electronic surveillance" in an eye- catching place.
  • Page 4 Thermal Imaging Box Network Camera Precautions User Manual Strictly conform to local electrical safety standards and use power adapters that are ⚫ marked with the LPS standard when installing and using this device. Otherwise, this device may be damaged. Use accessories delivered with this device. The voltage must meet input voltage ⚫...
  • Page 5 Thermal Imaging Box Network Camera User Manual Precautions Use a soft and dry cloth to clean the device body. In case that the dirt is hard to ⚫ remove, use a dry cloth dipped in a small amount of mild detergent and gently wipe the device, and then dry it again.

  • Page 6: Table Of Contents

    Thermal Imaging Box Network Camera Contents User Manual Contents 1 Product Overview ....................1 1.1 Thermal Imaging Principles and Advantages ..............1 1.2 Device Structure ......................1 1.3 Cable Connection ......................2 1.4 Functions and Features ....................4 2 Device Dimensions ....................5 3 Installation ........................
  • Page 7 Thermal Imaging Box Network Camera User Manual Contents 7.6 Personnel count ......................51 7.7 Enter Area........................55 7.8 Leave Area ........................57 8 Parameter Setting ....................59 8.1 Sensor Setting Interface ....................59 8.2 Mode ..........................60 8.3 Image Setting ....................... 60 8.4 Scene ..........................

  • Page 9: Product Overview

    Thermal Imaging Box Network Camera Product Overview User Manual Product Overview 1.1 Thermal Imaging Principles and Advantages For any object, as long as its temperature is above the absolute zero (-273.15°C), although the object does not give out light, it can radiate infrared. The infrared is also known as thermal radiation.

  • Page 10: Cable Connection

    Thermal Imaging Box Network Camera Product Overview User Manual Appearance and interfaces of device Interfaces Physical Interface Connection Power indicator Indicates the power status Connector Connector of multi-connector combination cable Reset button The configuration resumes to the factory settings (RESET) after you press the reset button for 3s.
  • Page 11 Thermal Imaging Box Network Camera Product Overview User Manual Multi-connector combination cable Multi-connector combination cable Functions Connection Alarm out Connects to the external alarm out device, such as alarm light. Alarm in Inputs the alarm signal, such as doorbell. Audio input Inputs the audio signal and receives the analog audio signals from the sound pick-up device.

  • Page 12: Functions And Features

    Thermal Imaging Box Network Camera Product Overview User Manual Functions Connection Analog video interface Sends analog video signals. User can connect the camera to a TV monitor through this port to view analog videos. RS 485/12 V Connects to the external pan & tilt/ Connects to a fan.

  • Page 13: Device Dimensions

    Thermal Imaging Box Network Camera Device Dimensions User Manual Device Dimensions Figure 2-1 shows the dimensions of the thermal imaging box network camera. Dimensions of 25 mm prime lens (unit: mm) Issue V1.1 ( 2021-07-26）...

  • Page 14: Installation

    Thermal Imaging Box Network Camera Installation User Manual Installation 3.1 Preparations User need the tools and accessories shown in Table 3-1 during the installation (you need to prepare the tools by yourself, and the accessories are in the package of the camera).
  • Page 15 Thermal Imaging Box Network Camera Installation User Manual Fix the installation block Installation block Step 2 Fix the installation block and mounting bracket, as shown in Figure 3-2. Fixing installation block and mounting bracket Step 3 Fix the mounting bracket on the wall, as shown in Figure 3-3. Issue V1.1 ( 2021-07-26）...
  • Page 16 Thermal Imaging Box Network Camera Installation User Manual Fix the mounting bracket Step 4 Focusing. (1) Focusing with focusing fixture Grasp the handle portion of the fixture, and focus along the direction of arrows, as shown in Figure 3-4. Issue V1.1( 2021-07-26)
  • Page 17 Thermal Imaging Box Network Camera Installation User Manual Focusing with focusing fixture (2) Focusing with focusing screw Insert the focusing screw into the screw hole and focus along the direction of arrows as shown in Figure 3-5. Focusing with focusing screw ----End Issue V1.1 ( 2021-07-26）...

  • Page 18: Quick Configuration

    Thermal Imaging Box Network Camera Quick Configuration User Manual Quick Configuration 4.1 Login and Logout You must use Internet Explorer 8 or a later version to access the web management system; otherwise, some functions may be unavailable. Login system Step 1 Open the Internet Explorer, enter the IP address of IP camera (default value: 192.168.0.121) in the address box, and press Enter.

  • Page 19: Main

    Thermal Imaging Box Network Camera Quick Configuration User Manual logout To logout of system, click in the upper right corner of the main page, the login page is display after you log out of the system. 4.2 Main Page layout On the main page, you can view real-time video, set parameter, Video parameter, Video control, and logout of the system.
  • Page 20 Thermal Imaging Box Network Camera Quick Configuration User Manual Element Description shown in Figure 4-3. Device You can choose a menu to set device parameters, configuration including the device information, audio and video streams, alarm setting, and privacy mask function. Change password You can click...

  • Page 21: Change The Password

    Thermal Imaging Box Network Camera Quick Configuration User Manual Personnel count interface User can choose the querying mode (year, month, day). The data can be viewed directly, or downloaded them. The statistic can be showed by line chart, histogram, list. ----End 4.3 Change the Password Description...

  • Page 22: Browse Video

    Thermal Imaging Box Network Camera Quick Configuration User Manual Modify Password dialog box The change password page will be displayed if you don’t change the default password when you login the system for the first time. User need to wait at least three minutes after changing password, and then restart the device.
  • Page 23 Thermal Imaging Box Network Camera Quick Configuration User Manual Add the a trusted site h ttp :// 19 2.1 68 .0. 121 Step 2 In the Internet Explorer, choose Tool > Internet Options > Security > Customer level, and set Download unsigned ActiveX control and initialize and script ActiveX controls not marked as safe for scripting under ActiveX controls and plug-ins to Enable, as shown in Figure 4-6.

  • Page 24: Install Plugins

    Thermal Imaging Box Network Camera Quick Configuration User Manual Step 3 Download and install the player control as prompted. The login page is display when the control is loaded. 4.4.1 Install Plugins You will be prompted with a message “Download and install the new plugin” will show as in Figure 4-7, when you login to the web management system for the first time.
  • Page 25 Thermal Imaging Box Network Camera Quick Configuration User Manual Local Network page Step 2 Set the parameters according to Table 4-2. Local network parameters Parameter Description Setting IP Protocol IPv 4 is the IP protocol that uses [Setting method] an address length of 32 bits. Select a value from the IPv 6 is the IP protocol that uses drop-down list box.
  • Page 26 Thermal Imaging Box Network Camera Quick Configuration User Manual Parameter Description Setting IP Address Device IP address that can be [Setting method] set as required. Enter a value manually. [Default value] 192.168.0.121 Subnet Mask Subnet mask of the network [Setting method] adapter.
  • Page 27 Thermal Imaging Box Network Camera Quick Configuration User Manual ⚫ If you set only the Subnet Mask, Default Gateway, Preferred DNS Server, and Alternate DNS Server parameters, you do not need to login to the system again. ⚫ You can click Reset to set the parameters again if required. ----End Issue V1.1 ( 2021-07-26）...

  • Page 28: Thermal Setting

    Thermal Imaging Box Network Camera Thermal Setting User Manual Thermal Setting 5.1 Temperature Parameters Temperature parameters include temperature unit, ambient type, ambient temperature, cavity temperature, correctional coefficient, area temperature display mode, area temperature type, measure mode, and area alarm interval. Operation Procedure Step 1 Choose Configuration >Thermal >Temperature Parameters.
  • Page 29 Thermal Imaging Box Network Camera Thermal Setting User Manual Step 2 Set the parameters according to Table 5-1. Temperature parameters Parameter Description Setting Temperature Unit Celsius and Fahrenheit [Setting method] temperature units are available. Select a value from the drop-down list box. [Default value] Celsius Cavity...
  • Page 30 Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting Area Temperature There are three types of area [Setting method] Type temperature. Select a value from the drop-down list box. [Default value] Highest Temperature Measure Mode There are two types measure [Setting method] modes.
  • Page 31 Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting Control Cover When prevent over heat mode is [Setting method] manual, the user should choose Select a value from the the action manually, such as drop-down list box. pick up, lay down.

  • Page 32: Ambient Temperature

    Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting Less Prominent Enable that, the image will [Setting method] show the setting color if the Enter a value manually. temperature is lower than set Choose one color to value.

  • Page 33: Temperature Area

    Thermal Imaging Box Network Camera Thermal Setting User Manual Ambient temperature Parameter of ambient temperature Parameter Description Setting Ambient Environment temperature of [Setting method] Temperature camera. Enter the temperature of ambient. [Default value] Adaptation Set the ambient temperature, click “Apply”, click “Refresh” ,the environment temperature camera will get the value...
  • Page 34 Thermal Imaging Box Network Camera Thermal Setting User Manual Temperature area and alarm configuration Step 2 Set the parameters according to Table 5-4. Temperature area and alarm configuration Parameter Description Setting Channel [Setting method] Select a value from the drop-down list box. [Default value] Issue V1.1( 2021-07-26)
  • Page 35 Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting Measure Mode Set at temperature parameter interface. Name Area name of temperature area. [Setting method] Enter a value manually. Type Type of temperature area. [Setting method] ID 0 is default rectangle area, Select a value from the which is full screen.
  • Page 36 Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting The emission rate is the Emission Rate [Setting method] capability of an object to emit Enter a value manually. or absorb energy. [Default value] The emission rate should be set 0.95 only when the target is special material.
  • Page 37 Thermal Imaging Box Network Camera Thermal Setting User Manual Parameter Description Setting Group ID The ID can be chosen into one [Setting method] of six groups, or no group. The Select a value from the group will be alarm following drop-down list box.
  • Page 38 Thermal Imaging Box Network Camera Thermal Setting User Manual Temperature Area Setting Interface Click Apply, the message “Apply success” is displayed, the temperature area is set successfully. NOTE ⚫ ID 0 is the full screen, the area cannot be changed. ⚫...

  • Page 39: Shield Area

    Thermal Imaging Box Network Camera Thermal Setting User Manual ----End 5.4 Shield Area Shield area is meaning that the camera will not to detect the temperature of that area. Operation Procedure Step 1 Choose Configuration >Thermal > Shield Area. Shield Area Step 2 Enable the shield area.

  • Page 40: Schedule Linkage

    Thermal Imaging Box Network Camera Thermal Setting User Manual 5.5 Schedule Linkage Operation Procedure Step 1 Choose Configuration >Thermal > Schedule Linkage. The Schedule Linkage page is displayed, as shown in Figure 5-7。There are two channels alarm output. It can also enable alarm record, SMTP, FTP upload and audio detect alarm.

  • Page 41: Bad Point Check

    Thermal Imaging Box Network Camera Thermal Setting User Manual ⚫ When you select time by dragging the cursor, the cursor cannot be moved out of the time area. Otherwise, no time can be selected. Method 3：Click in the alarm time page to select the whole day or whole week. Deleting alarm time: Click again or inverse selection to delete the selected alarm time.
  • Page 42 Thermal Imaging Box Network Camera Thermal Setting User Manual Bad Point Check Step 2 Click the white point at image, click Test to recover the bad point, as shown in Figure 5-9. Issue V1.1( 2021-07-26)

  • Page 43: Version Information

    Thermal Imaging Box Network Camera Thermal Setting User Manual Recover bad point Step 3 Click Apply. The message "Apply success" is displayed, the system saves the settings. ----End 5.7 Version Information Choose Configuration >Thermal > Version Information. User can view the version information as shown in Figure 5-10.

  • Page 44: Ai Multiobject

    Thermal Imaging Box Network Camera AI Multiobject User Manual AI Multiobject 6.1 Parameters of AI Multiobject AI Multiobject Parameters of AI multiobject Parameter Description How to set Full body The camera will snap the whole body when Enable detection someone appear in live video. Vehicle The camera will snap the licence when the Enable...
  • Page 45 Thermal Imaging Box Network Camera AI Multiobject User Manual Parameter Description How to set Show detection Enable to set a detection area, and the frame will Enable area show at live video Snapshot mode There are three mode can be chosen, such as Choose from drop timing, and optimal.

  • Page 46: Intelligent Analysis

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual Intelligent Analysis 7.1 Perimeter The perimeter function refers to that an alarm is generated when the targets of specified types (such as person, car, and both person and car) enter the deployment area. Procedure Step 1 Select Intelligent Analysis >...
  • Page 47 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Perimeter Parameter Description Parameter Description Setting Enable Enable the button to enable the alarm. [How to set] Click Enable to enable. [Default value] Sensitivity The sensitivity of detecting the target, when [How to set] the value is high, the target can be detected Choose from the...
  • Page 48 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Move the cursor to the drawing interface and click to generate a point, move the cursor to draw a line, and then click to generate another point. This is how a line is generated. In this way, continue to draw lines to form any shape, and right-click to finish line drawing.

  • Page 49: Single Virtual Fence

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual 7.2 Single Virtual Fence A single virtual fence is a line that is set at a concerned position within the monitored field of view and specifies the forbidden travel direction, an alarm is generated when the targets of specified types (such as person or car) cross this line.
  • Page 50 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Description of Parameters for Single Virtual Fence Parameter Description Setting Enable Enable the button to enable the alarm. [How to set] Click Enable to enable . [Default value] Limit Target Effective alarms are set based on target type, [How to set] Type with options of Person or Car, person, car.

  • Page 51: Double Virtual Fences

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual Setting a single virtual fence: click a line (and the trip line turns red) to select the single virtual fence and set its direction as positive, reverse or bidirectional, or delete the selected line.
  • Page 52 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Double Virtual Fences Setting Interface Step 2 Set all parameters for the double virtual fences. Table 7-3 describes the specific parameters. Description of Parameters for Double Virtual Fence Parameter Description Setting Enable Enable the button to enable the alarm.
  • Page 53 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Output If you check to set the Output Channel and the [How to set] Channel device is connected to an external alarm Click to select an indicator, the alarm indicator signals when an alarm is triggered.

  • Page 54: Multi Loiter

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual NOTE ⚫ The two virtual fences are in sequential order. An alarm is generated only when a target crosses virtual fence 1 and then virtual fence 2 within the set maximum passing time. ⚫...
  • Page 55 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Multi Loiter Setting Interface Step 2 Set all parameters for multiple loitering. Table 7-4 describes the specific parameters. Multiple Loitering Parameter Description Parameter Description Setting Enable Enable the button to enable the alarm. [How to set] Click Enable to enable .
  • Page 56 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Limit Numbers When Limit Numbers is set to OFF, an alarm [How to set] is generated no matter how many people Click to enable loiter. When Limit Numbers is set to ON, if Limit Numbers.

  • Page 57: Converse

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual NOTE ⚫ A drawn line cannot cross another one, or the line drawing fails. ⚫ Any shape with 8 sides at most can be drawn . ⚫ The quantity of deployment areas is not limited yet and will be described in future when a limit is applied.
  • Page 58 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Converse Setting Interface Step 2 Set all parameters for converse. Table 7-5 describes the specific parameters. Converse Parameter Description Parameter Description Setting Enable Enable the button to enable the alarm. [How to set] Click Enable to enable .

  • Page 59: Personnel Count

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Output If you check to set the Output Channel and the [How to set] Channel device is connected to an external alarm Click to select an indicator, the alarm indicator signals when an alarm is triggered.
  • Page 60 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Procedure Step 1 Select Intelligent Analysis > Personnel Count to access the Personnel Count setting interface, as shown in Figure 7-7. Personnel count Issue V1.1( 2021-07-26)
  • Page 61 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Step 2 Set all parameters for illegal parking. Table 7-6 describes the specific parameters. Description of Parameters for Personnel Count Parameter Description Setting Enable Enable the button to enable the alarm. [How to set] Click Enable to enable .
  • Page 62 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Over People Enable, if the counting number is pass the [How to set] Number threshold, it will alarm. Click Enable to Alarm enable . [Default value] Alarm the threshold of enable alarm. [How to set] Threshold Enable /Input a...

  • Page 63: Enter Area

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual 7.7 Enter Area Set the area, when the target enter the area, it will alarm. Procedure Step 1 Select Intelligent Analysis > Enter Area to access the Enter Area setting interface, as shown in Figure 7-8.
  • Page 64 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Sensitivity The sensitivity of detecting the target, when the [How to set] value is high, the target can be detected easily, but Choose from the the accuracy will be lower. drop-down list [Default value] Limit...

  • Page 65: Leave Area

    Thermal Imaging Box Network Camera Intelligent Analysis User Manual 7.8 Leave Area When the target leave the setting area, it will be alarm. Procedure Step 1 Select Intelligent Analysis > Leave Area to access the Leave Area setting interface, as shown in Figure 7-9. Leave area Step 2 Set all parameters for illegal parking.
  • Page 66 Thermal Imaging Box Network Camera Intelligent Analysis User Manual Parameter Description Setting Sensitivity The sensitivity of detecting the target, when the [How to set] value is high, the target can be detected easily, but Choose from the the accuracy will be lower. drop-down list [Default value] Limit...

  • Page 67: Parameter Setting

    Thermal Imaging Box Network Camera Parameter Setting User Manual Parameter Setting 8.1 Sensor Setting Interface Operation Procedure Step 1 On the Internet Explorer interface or the client software interface, select and right-click the surveillance image to the set, as shown in Figure 8-1. Sensor Setting Right-click setting parameters Parameter...

  • Page 68: Mode

    Thermal Imaging Box Network Camera Parameter Setting User Manual 8.2 Mode Figure 8-2 shows the Mode interface. Mode interface Operation Procedure Step 1 Click in the lower left corner of Sensor Setting, and choose Debug Mode. Step 2 Choose the Time Mode. Step 3 Set the Start Time Step 4...
  • Page 69 Thermal Imaging Box Network Camera Parameter Setting User Manual Image interface Table 8-2 lists the image setting parameters. Image setting parameters Parameter Description Setting Brightness It indicates the total brightness of an image. As [Setting the value increases, the image becomes brighter. method] Drag the slider.

  • Page 70: Scene

    Thermal Imaging Box Network Camera Parameter Setting User Manual 8.4 Scene Figure 8-4 shows the Scene interface. Scene interface Provide the selection of image pixel locations. Normal: the image is not flipped. Horizontal: the image is flipped left and right. Vertical: the image is flipped up and down.

  • Page 71: Ffc Control

    Thermal Imaging Box Network Camera Parameter Setting User Manual Set pseudocolor interface Polarity/LUT: the temperatures of the temperature fields detected by the thermal imaging camera are separately mapped to values ranging from 0 to 255 by the algorithm. In the black/white display mode, this range is converted to the grayscale tones.
  • Page 72 Thermal Imaging Box Network Camera Parameter Setting User Manual FFC control interface Table 8-3 lists the parameters on the FFC control interface. Parameters on the FFC control interface Parameter Description Setting The internal of the thermal imaging camera may comprise the mechanical action correction mechanism that can periodically improve the image quality.

  • Page 73: Noise Reduction

    Thermal Imaging Box Network Camera Parameter Setting User Manual Parameter Description Setting collected by the internal temperature probe. The temperature of the camera sharply changes when the camera is powered on. The FFC is relatively frequent, which is normal. Manual: In the manual FFC mode, the camera does not automatically perform the FFC based on the temperature change or the specified period.

  • Page 74: Lens Control

    Thermal Imaging Box Network Camera Parameter Setting User Manual Noise reduction interface Table 8-4 lists the Noise reduction parameters. Parameters on the Noise reduction interface Parameter Description Setting [How to set] Select from the drop-down list box. Drag the slider to adjust max Decrease the image 2 DNR strength.
  • Page 75 Thermal Imaging Box Network Camera Parameter Setting User Manual Lens control interface Step 1 Click in the lower left corner of Sensor Setting, and choose lens control. Step 2 Click “Near focus” or “Far focus” to focus automatically. Step 3 Choose focus mode, there are two modes can be chosen, semi-automatic and manual.

  • Page 76: Troubleshooting

    Thermal Imaging Box Network Camera A Troubleshooting User Manual Troubleshooting Common Possible Cause Solution Trouble Unable to Network is not Connect the network cable of the camera to ⚫ access the connected. the PC to check whether the network cable is in good contact.
  • Page 77 Thermal Imaging Box Network Camera A Troubleshooting User Manual Common Possible Cause Solution Trouble An error The data in the Delete the cache of the Internet Explorer. The occurs in cache of browser is steps are as follows (taking IE9 as an example): accessing not updated in time.

  • Page 78: Common Emission Rate

    Thermal Imaging Box Network Camera B Common Emission Rate User Manual Common Emission Rate The emission rate is the capability of an object to emit or absorb energy. An ideal transmitter provides an emission rate of emitting 100% of intake energy. An object with an emission rate of 0.8 can absorb 80% of intake energy, and reflect the remaining 20%.
  • Page 79 Thermal Imaging Box Network Camera B Common Emission Rate User Manual Cobalt 599/111 0.19 199/390 0.52 Steel 599/1110 0.57 Tinned iron sheet (Light) 28/82 0.23 Brass(High-polish) 247/476 0.03 Brass (Tough rolled, polished 21/70 0.04 metal wire) Tinned Iron (Light) 0.13 Iron plate (Rust eaten) 20/68 0.69...
  • Page 80 Thermal Imaging Box Network Camera B Common Emission Rate User Manual Concrete 0.94 Glass (Glossy) 22/72 0.94 Granite (Surfaced) 21/70 0.85 0/32 0.97 Marble (I Polished, grey) 22/72 0.93 Asbestos board 23/74 0.96 38/100 0.93 Asbestos paper 371/700 0.95 Asphalt ( Paving the road) 4/39 0.97 Paper ( Black tar)

Table of Contents