mdrOpen
This function opens a communication line (channel).
■ Format
short mdrOpen (short sChan, short sMode, long* plPath, long lTimeOut)
■ Argument
Argument
sChan
sMode
plPath
lTimeOut
■ Description
• The path of the channel opened by the mdrOpen function is used when MELSEC iQ-R series data link functions are
executed.
• To end the program, close the path of the opened channel using the mdrClose function.
■ Return value
Return value
0 (0000H)
Other than 0 (0000H)
■ Relevant function
Page 82 mdrClose
3 DETAILS OF FUNCTION
90
3.2 MELSEC iQ-R Series Data Link Functions
Name
Channel
Mode
Path of channel
Timeout value
Description
Normal
Error
For details on the error, refer to the following chapter.
Page 108 ERROR CODE LIST
Description
Specify a communication line (channel).
Page 14 Argument specification
Specify '-1'.
Specify the storage destination (address) of the path of the channel.
(The path of the opened channel is stored.)
Specify the timeout value of MELSEC iQ-R series data link function for
MELSEC iQ-R series bus interface (Channel No.12)
• Setting range: 1 to 360 sec (1 sec unit)
IN/OUT
IN
IN
OUT
IN