Mitsubishi Electric MELSEC iQ-R Series Manual page 74

CITL_EnableYInt_ISR
This function enables the routine registered with the CITL_EntryYInt function.
■ Format
short CITL_EnableYInt_ISR (short sYNo)
■ Argument
Argument
sYNo
■ Description
• This function enables the routine registered with the CITL_EntryYInt function. (The registered routine is executed when an
output signal (Y) interrupt occurs.)
• Specify the output signal (Y) number (sYNo) specified in the CITL_EntryYInt function in the output signal (Y) number
(sYNo).
■
WARNING
CITL_EnableYInt_ISR function does not check the specified argument.
Create a program with the following conditions in mind.
• Do not specify an unregistered output signal (Y).
■ Return value
Return value
0 (0000H)
■ Relevant function
Page 30 CITL_EntryYInt
Page 71 CITL_DisableYInt_ISR
3 DETAILS OF FUNCTION
72
3.1 C Intelligent Function Module Dedicated Functions
Name
Output signal (Y) number
Description
Normal
Description
Specify the output signal (Y) number.
(If -1 is specified, enable all the registered routines.)
IN/OUT
IN