Mitsubishi Electric MELSEC iQ-R Series Manual page 26

CITL_DisableYInt
This function disables the routine registered with the CITL_EntryYInt function.
■ Format
short CITL_DisableYInt (short sYNo)
■ Argument
Argument
sYNo
■ Description
• This function disables the routine registered with the CITL_EntryYInt function. (The routine is not executed when an output
signal (Y) interrupt occurs.)
• Specify the output signal (Y) number (sYNo) specified in the CITL_EntryYInt function in the output signal (Y) number
(sYNo).
• The output signal (Y) interrupt event notification wait function (CITL_WaitYEvent function)and the function executing
interrupt routine when output signal (Y) interrupts (Defined by CITL_EntryYInt/CITL_EnableYInt/CITL_DisableYInt function)
operate independently. These functions operate independently even if interrupt occurs by the same output signals (Y).
■ Return value
Return value
0 (0000H)
Other than 0 (0000H)
■ Relevant function
Page 25 CITL_EnableYInt
Page 30 CITL_EntryYInt
3 DETAILS OF FUNCTION
24
3.1 C Intelligent Function Module Dedicated Functions
Name
Output signal (Y) number
Description
Normal
Error
For details on the error, refer to the following chapter.
Page 108 ERROR CODE LIST
Description
Specify the output signal (Y) number.
(If -1 is specified, disable all the registered routines.)
IN/OUT
IN