Horizon Fitness AT 7.0 Owner's Manual page 28

BLUETOOTH HEART RATE MONITORING
The 7.0AT is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible Bluetooth heart rate monitoring
devices to this treadmill. You will need to ensure that your wireless heart rate monitoring device is Bluetooth 4.0 compatible and is also "open"
to sharing data. Non-"open" or "closed" devices typically only share data with their proprietary apps. The 7.0AT needs an "open" device to
receive data from the device. You may need to consult with your device's owner's manual or the manufacturer to confirm if it is an open device.
Pair the receiver to the app and the console will receive the information from the tablet. To use the Bluetooth HR monitor without a tablet,
press and hold the Bluetooth button to enable the console to communicate with the receiver. When paired with the Bluetooth HR monitor
the console will not pair with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power.
USING YOUR MUSIC DEVICE
The 7.0AT treadmill will connect and stream music form your compatible music device. This includes many smart phones and traditional mp3
players.
Your 7.0AT comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music wirelessly from your device to the
speakers. You can also connect your music device via an audio cable and stream music through the speakers. Instructions for both types of
audio connection are detailed below.
CONSOLE AUDIO CONTROLS
A) MEDIA SKIP KEYS: Used to skip to previous or next audio track.
B) MEDIA RUN/PAUSE/STOP KEYS: Top button used to pause/play media,
bottom button stops media.
C) WORKOUT KNOB: controls speaker volume during workout. Ensure
your device volume is turned up.
28
A B
C