Assembly Step - Horizon Fitness TT5.0 Assembly Manual

ASSEMBLY STEP 1

1
3
4
6
HZ16_AG_TT_5.0_Rev_1_A.indd 6-7
A Open the HARDWARE PACK 1
B See No.1 on the drawing, pick the console mast
which with the CONSOLE CABLE, and connect
to the cable from BASE FRAME, then attach this
console mast to BASE FRAME and screw by 1 x
hardware assembly (Z01+Z03+Z04)
C See No.2 on the drawing, connect CONSOLE
MAST to the BASE FRAME and screw by 1 x
hardware assembly Refer to the assembly
process of No.2, then repeat on No.3 and No.4
2
Z01
Z03
Z04
ASSEMBLY STEP 2
1
A Attach 2 x WATER BOTTLE HOLDER on the both
side of CONSOLE MAST, then put the CONSOLE
CABLE through WATER BOTTLE HOLDER in the
right side
B Tight the CONSOLE CABLE to CONNECTION
CABLE which is on the SHORT HANDLEBAR,
then pull the CONNECTION CABLE until get the
CONSOLE CABLE
C Attach SHORT HANDLEBAR on the both side of
WATER BOTTLE HOLDER
D Open HARDWARE PACK 2, attach BRACE
PLATE beneath the CONSOLE MAST on the
left side then screw by 1 x hardware assembly
(Z02+Z03+Z04)
E Repeat the process C on the right side
Z02
ATTENTION
Z03
DO NOT PINCH THE CABLE !!
Z04
7
12/6/16 2:26 PM