Horizon Fitness AT 7.0 Owner's Manual page 12

ASSEMBLY STEP 2
PART TYPE
E HEX SOCKET BOLT
F FLAT WASHER
G SPRING WASHER
5
4
12
HARDWARE FOR STEP 2
DESCRIPTION
M8X1.25PX15L
Ø8.2XØ15.0X1.2T
Ø8.0XØ13.0X1.5T
2
F
G
E
E
G
F
3
2.1 Open HARDWARE FOR STEP 2.
QTY
2.2 Gently place the CONSOLE (5) on top of the CONSOLE
MASTS (3&4). The CONSOLE CABLE (2) is tucked
4
into the RIGHT CONSOLE MAST (3). Using the lead
4
wire carefully pull the CONSOLE CABLE (2) out of the
4
RIGHT CONSOLE MAST (3). Detach and discard the
LEAD WIRE. Connect the CONSOLE CABLES (2).
2.3 Attach the CONSOLE (5) using 4 BOLTS (E), 4 SPRING
WASHERS (G) and 4 FLAT WASHERS (F).
2.4 Carefully tuck wires into the RIGHT CONSOLE MAST
(3) to avoid damage.
NOTE: Be careful not to pinch any wires while
assembling the console.
NOTE: Fully tighten all bolts from STEPS 1 & 2.
E
G F