Starting/Stopping The Motors - dji Mini 3 User Manual

DJI Mini 3
User Manual

Starting/Stopping the Motors

Starting the Motors
Perform the Combination Stick Command (CSC) as shown below to start the motors. Once the
motors have started spinning, release both sticks simultaneously.
OR
Stopping the Motors
When the aircraft is on the ground and the motors are spining, there are two ways to stop the
motors:
Method 1: Push the throttle stick down and hold. The motors will stop after one second.
Method 2: Perform the same CSC used to start the motors and hold. The motors will stop after
two seconds.
OR
Method 1 Method 2
Stopping the Motors Mid-Flight
Stopping the motors mid-flight will cause the aircraft to crash. DO NOT stop the motors
mid-flight unless you encounter an emergency situation, for example, if a collision has
occurred, or if the aircraft is out of control and ascending or descending quickly, or the
aircraft is rolling in the air. To stop the motors mid-flight, perform the same CSC used
to start the motors. Note that the user needs to hold the control sticks for 2 s while
performing the CSC to stop the motors. The default setting can be changed in DJI Fly.
55 ©
2022 DJI All Rights Reserved.