Firmware; Reset To Defaults - Victron energy SmartShunt IP65 Manual

Manual - SmartShunt IP65
proximity of each other it might become confusing with which battery monitor you are communicating. You can, for example, add
identification numbers to their name, like: Battery Monitor A, Battery Monitor B and so on.

7.5.8. Firmware

Both the battery monitor and its Bluetooth interface run on firmware.
Occasionally a newer firmware version is available. New firmware is released to either add features or to fix a bug. The product
overview in the VictronConnect app displays the battery monitor and the Bluetooth interface firmware version. It also indicates
whether the firmware is the latest version, and there is a button you can press to update the firmware.
On the first installation, it is always recommended to update to the most recent firmware (if available). Whenever you connect
to the battery monitor with an up-to-date version of the VictronConnect app, it will check the firmware, and if there is a newer
version available, it will ask you to update the firmware. The VictronConnect app contains the actual firmware files, so an internet
connection is not needed to update to the most recent firmware as long as you are using the most up-to-date version of the
VictronConnect app.
A firmware update is not mandatory. If you choose not to update the firmware, you can only read out the battery monitor, but you
cannot change settings. Settings can only be changed if the battery monitor runs on the most recent firmware.
For more information on firmware updates also see the VictronConnect app manual Firmware update chapter.

7.5.9. Reset to defaults

To set all settings back to default select "Reset to defaults". Please note that this only resets all settings to their default values, the
history is not reset.
Page 29 All features and settings