Auxiliary Connection For Temperature Monitoring; Gx Device Connection - Victron energy SmartShunt IP65 Manual

3.5.3. Auxiliary connection for temperature monitoring

For use to monitor the temperature of a battery via the (not included)
temperature sensor needs to be purchased separately. Be aware that this is a different temperature sensor than the temperature
sensors that are included with Victron inverter/chargers and some battery chargers.
Connection procedure:
Note that the temperature sensor wires do not easily connect to the SmartShunt wires. You will have to make
your own provision that the connection between the temperature sensor and the SmartShunt is made in a safe
and electrical sound way.

3.6. GX device connection

If the system contains a GX device such as a
VE.Direct cable or a VE.Direct to USB
Once connected, the GX device can be used to read out all monitored battery parameters. For more information see chapter
Connecting to a GX device and the VRM portal
Page 6
Manual - SmartShunt IP65
Battery monitor with auxiliary midpoint monitoring.
Temperature sensor for BMV-712 Smart and BMV-702
Temperature sensor for the battery monitor
Battery monitor with auxiliary temperature sensing.
Cerbo GX, the battery monitor can be connected to the GX device using a
interface.
[18].
. This
Installation