Bosch MIC inteox 7100i Installation Manual page 34

34 en | Installing a MIC Camera on a Hinged DCA MIC inteox 7100i
7. For inverted installation, apply a small amount of grease to the primary O-ring to hold it in
place.
8. Push the wires from the camera base into the DCA while positioning the base pin of the
camera under the DCA hook (item 1). Avoid pinching the wires! (item 2). Loosen the hook
bolts, and then slide the hook down to secure the camera pin. Fully tighten the hook bolts
(item 3).
9. Carefully tilt the camera to the side with the pin under the hook.
2022-09 | 2.1 | Bosch Security Systems
Installation Manual