MIC inteox 7100i
Figure 5.6: MIC camera with camera head inverted
Note: It is not necessary to remove the section for the illuminator on the sunshield because
the illuminator is attached to the opposite side of the camera visor.
Seal the mount so that moisture or water cannot collect and stay in the bottom of the MIC
camera.
The figure that follows shows the camera installed in inverted orientation on a pole.
Figure 5.7: MIC camera mounted in inverted orientation (on pole)
Bosch Security Systems
Installation Manual
Mounting | en
23
2022-09 | 2.1 |