System Description - LAMINOX KING HEAT 6 User Manual

and on alert, the heat pump must be connected to the mains and have a power
supply, even if it is switched off or not in use.
A water filter should be installed in the installation, in order to avoid obstructions in the
water circuit of the heat pump. It must be installed in the return circuit of the heat
pump and MUST be installed before filling and circulating the water through the
installation. The water filter should be checked and cleaned, if necessary, at least
once a year. IN new installations, however, it is advisable to check it within the first
few months of its commissioning.

3 SYSTEM DESCRIPTION

The unit is a monoblock (single unit) air/water heat pump, specially designed for the
colder climate. There is no need for bore holes and usually the system can be
installed within 1 day.
The unit can both heat hot water effectively at high outdoor temperatures and give a
high output to the heating system at low outdoor temperatures. If the outdoor
temperature drops to a level lower than minus 0°C (factory setting), the auxiliary
heater switches on to ensure the heat pump unit works normally. The unit is also
capable of cooling in the summer. The heat pump controller is an intelligent wired
system.
The unit is rated as 6KW/9KW/12KW/18KW. The Material/components are chosen to
provide a long service life and to fully withstand harsh outdoor conditions.
The unit has two different installation options:
1). Space heating/cooling + DHW (Domestic hot water)
2). Space heating/cooling only or DHW only
- 6-