Transport, Storage And Handling Warnings; Freeze Protection Warnings - LAMINOX KING HEAT 6 User Manual

2.3 Transport, storage and handling warnings

The heat pump must be transported, handled and stored vertically. Tipping the
machine may cause the compressor or other components damage.
Do not twist, loosen or pull the external electric cables of the heat pump. Do not insert
any sharp objects through the fan grille or into the fan itself.
Do not wash the interior of the heat pump with water as this may result in electric
shock or fire. For any cleaning and /or maintenance operations, disconnect the main
power supply.

2.4 Freeze protection warnings

The heat pump is a machine that is installed in the exterior of the house, so that it will
be exposed to the extreme climatic conditions of cold in the periods of frost. Due to
this, it is of paramount importance that this type of machine is protected against such
frost. The freezing of the water inside the heat pump causes the heat pump to
breakdown, with the subsequent interruption of its operation and major economic
expenses involving its repair.
It is mandatory to use a safety system in the installation to prevent the freezing of the
water in the machine. We proposes the use of glycol in the water circuit of the heat
pump, or some antifreeze valve system to empty the installation in conditions of low
temperatures. Carefully read the "Freeze Protection" section in this manual for more
detailed information on these systems. We will not cover damages caused by the lack
of any of these antifreeze safety systems.
The electronic controller of the heat pump has a function for protection against the
freezing of the water in its interior in periods of frost. For this function to remain active
- 5-