A. Auto temp. mode valid or not is up to parameter P18. If the data is set 0, means invalid,
1 means valid.
B. Auto heat curve shifting is decided by parameter P09, positive value means move up,
negative value means move down. (-10°C ~10°C).
C. Auto heat curve highest temp is decided by parameter P08, from 30~50, default 45.
When the parameter is 45, the AU highest target temp is 45°C.
5.3.2-5 Timing
Click timer button
5.3.2-6 Parameters modification
Click Setup button
parameters.
,can set operating time range for heat pump and C3 pump.
, and select button <system parameter>. Input password "99", and can modify
- 29-