LAMINOX KING HEAT 6 User Manual page 45

3. Add device
Step 1: Activate the pairing mode on your heat pump controller according to the following:
click for 3 seconds to enter following page. Click «Smart mode» to activate WiFi. The
symbol will flash quickly.
Note: The blinking will stop when the APP is connected to WiFi.
Step 2: Now activate the pairing. Choose the WiFi network to use, enter its password
and click «Next».
ATTENTION: The «Comfort_Life» application only supports 2.4GHz WiFi networks.
If your WiFi network uses the 5GHz frequency, go to the interface of your home WiFi network
to create a second 2.4GHz WiFi network (available for most Internet Boxes, routers and WiFi
access point).
- 45-