Storage And Transport; Significant Markings; Sizing - Honeywell SALISBURY ARC FLASH PROTECTIVE GARMENTS User Manual

Table of Contents

Advertisement

ASSEMBLY INSTRUCTIONS FOR LIFT FRONT HOODS LFH20RG-PP,
LFH25PO-PP, LFH40RG-PP, LFH40PRG-PP, LFH65PRG-PP AND LFH100PRG-PP
1
4

5. STORAGE AND TRANSPORT

The PPE is packed and delivered in a polyethylene bag. The PPE must be stored and
transported in a similar polyethylene bag in a dry and dust-free environment, protected
from physical damage, mechanical effects, UV light, temperature extremes and
chemicals which may damage the PPE and affect its protective properties.

6. SIGNIFICANT MARKINGS

Coat and Coverall have markings located on the right side of chest. For Overpants
and Bib Overalls the markings are located on right thigh area. For hoods the markings
are located at lower right corner. The marking is in white color lettering indicating
the ATPV/EBT rating as (8, 12, 20, 25, 40, 65 or 100) after CAL/CM².
14
2
3
5

7. SIZING

Honeywell Salisbury Arc Flash Protection Hoods are designed in universal size,
i.e. one size fits to all.
For selecting appropriate garment sizes, refer following wearer body size chart as per
EN 13688 guidelines. Each product label on garment is marked with below pictogram,
indicating wearer body sizes in centimeters (cm), which can be considered as a guideline
to select the appropriate sizes of garment.
INSTRUCTIONS FOR
MEASURING THE
WEARER
To obtain an accurate body
measurement, use a tape
measure. Follow the
instructions below.
1. Ask for help. Taking your
own measurements can lead
to inaccurate measurements,
which can affect the protective
properties of the PPE.
2. Wear only a light layer of
clothing to ensure that
an accurate measurement
is taken
3. Keep tape measure flat
against the body, keeping
tape level and straight
4. Keep one finger between
tape and body. It should
feel comfortable, not too
tight or too loose.
5. If after measuring there are changes in body size that could change garment size based on
these charts, re-measure and obtain a new size garment as necessary.
WEARER BODY DIMENSION RANGE IN INCH (CM)
tight or too loose.
Size
X (Chest)
Small
34-36 (86-91)
Medium
38-40 (96-101)
Large
42-44 (106-112)
XLarge
46-48 (117-122)
2XLarge
50-52 (127-132)
3XLarge
54-56 (137-142)
4XLarge
58-60 (147-152)
5XLarge
62-64 (157-162)
For more details on garment sizes refer following pages for product dimension charts.
X (Chest)
Measure around the
fullest part of your
chest-just under the
arms and across the
X
shoulder blades.
If your chest falls
between the sizes,
order the next size up.
W
W (Waist)
Z
Measure aroud your
natural waistline at the
position your pants
would normally sit.
Z (Height)
Measure from the tip
of the head to the sole
of the bare foot.
Y (Waist)
Z (Height)
28-30 (71-76)
67-70 (170-178)
32-34 (81-86)
67-70 (170-178)
36-38 (91-96)
68-71 (172-180)
40-42 (102-107)
68-71 (172-180)
44-46 (112-117)
69-72 (175-182)
48-50 (122-127)
69-72 (175-182)
52-54 (132-137)
70-73 (177-185)
56-58 (142-147)
70-73 (177-185)
15

Advertisement

Table of Contents
loading

Table of Contents