Installation And Starting - Cattani TURBO SMART HP Instruction Manual

6

INSTALLATION AND STARTING

RECOMMENDED PRECAUTIONS
Before unpacking the device, check the outside
of the packaging, check the Shockwatch impact
indicator device, if it is red, or if the box is damaged,
accept it, subject to inspection of the device.
To remove the machine from the box, follow the
instructions printed on the outside of the packaging.
The box can be recycled. Please dispose of it
according to the regulations in force. Hold on to the
stoppers of the device external/ internal connectors,
they can be used whenever the aspirator needs to
be moved.
Installation of the device must be performed by
a skilled person using suitable tools. The suction
unit must be placed in a clean area, away from heat
sources, humidity and dust.
Ambient temperature of the technical room must
be below + 5°C and not above +35 °C.
Turbo-Smart HP is a device for interiors and not
intended for exterior installation.
If ventilation or air conditioning is needed in the
plant room, the ventilation or air conditioning
system should be designed by a thermal engineer.
The plant room shall not be accessible to patients
or the public. Should this facility not be available,
the equipment must be protected by casing not
easily removable.
Put in place protections and danger signs in
order to prevent accidental contact dangerous for
electric shock and (in some rare but not impossible
situation) for the possibility of fire, explosion due
to leakage of contaminated liquids and air. No
flammable material should be stored in the plant
room; ensure that there is no possibility of gas
leaks in the room. Caution: to avoid electric shock
risk, this device must be connected only to supply
network with Earthing protection.
cod: ed. 09-2021
HANDLE
WITH CARE
WARNING
WARNING
SHOCKWATCH
R
RED INDICATES ROUGH HANDLING
IF RED, NOTE ON BILL OF LADING
INSPECTION MAY BE WARRANTED
MODEL L-55 (37g)