Important Warnings; Transport And Storage; Transport Of Used Systems - Cattani TURBO SMART HP Instruction Manual

28

IMPORTANT WARNINGS

TRANSPORT AND STORAGE

TRANSPORT OF USED SYSTEMS

IMPORTANT WARNINGS
• The machines are guaranteed for one year from
the date of sale, on condition that the warranty card's
voucher indicating the date of sale, the seller and the
customer user be returned to the manufacturer.
• The warranty and manufacturer's liability shall
cease to apply if the equipment is serviced with
unsuitable products or products other than those
indicated by the manufacturer, used incorrectly
or if the equipment is tampered with in any way by
persons not authorized by the manufacturer.
• The manufacturer, the dealers, the representatives
and the authorized technicians are available for
advice, recommendations and to provide manuals,
spare parts and whatever is needed.
• The manufacturer may decide to introduce changes
in the products without notice due to technical needs,
TRANSPORT AND STORAGE
• During transport and storage, the packaged
equipment can withstand temperatures ranging
from -10 °C to + 60 °C.
• The packages should not be exposed to water and
TRANSPORT OF USED SYSTEMS
• Before packing, we recommend you clean and
disinfect the suction unit with Puli-Jet Plus New
(see chapters on "Signs and warnings" and "Regular
maintenance").
• Drain all tubes and outside/inside communications
as liquid residues (even disinfectant) could damage
the control unit. Remove the amalgam retention
vessel, add the disinfectant, close the vessel
sealed. Dry the suction unit inside and outside,
cod: ed. 09-2021
product improvement programmes, regulatory or
functional problems, difficulty in sourcing parts or
semi-finished products.
• At the www.cattani.it website you can find our
latest updated manuals. We recommend you refer
to these especially for the latest safety updates.
• Smart systems are AEE equipment, thus subject
to WEEE (Waste Electrical and Electronic Equipment
Directive) regulations.
Sprays and cannot be withstand humidity above
70%.
• Three layers of boxes can be stacked over it,
provided they have the same weight.
close all outside/inside communications with the
stoppers provided, install a new amalgam retention
vessel, wrap the suction unit and the control unit
separately, to ensure maximum water tightness.
• Place the equipment inside a polyethylene bag
and pack with triple-wave cardboard.