Instructions For Adjusting Some Parameters In The Menus Of Smart Aspirators - Cattani TURBO SMART HP Instruction Manual

INSTRUCTIONS FOR ADJUSTING SOME
PARAMETERS IN THE MENUS OF SMART
ASPIRATORS
MAIN MENU
MAIN MENU "A1"
CONTROL MENU "A2"
EVENT MENU "A3"
WI-FI SCAN MENU "A4"
When the control unit is switched on, the graphic display shows the Cattani S.p.A.
logo for 10 seconds, then the main menu appears.
The display shows parameters such as operating frequency, time for suction unit
activation, temperature, amalgam container (if any) and system software version.
Press the right arrow
This menu shows: number of times the machine was switched on, total switched-
on hours, number of suction unit activations, actual hours of suction unit use,
operation hours in relation to frequency and number of fan activations.
Right arrow
This menu lists the last events or alarms occurred. Events are identified by a
number, see table on page 37 for a list.
Right arrow
Here you can scan available Wi-Fi networks.
to access Menu A2.
15
cod: ed. 09-2021