Table of Contents
Advertisement
DEVIreg™ Touch
The screen of the heating cable must be connected
to the earth conductor of the power supply cable
by using a separate connector.
Note: Always install the floor sensor in a conduit in the
floor.
3.
Mount and reassemble the thermostat.
• Fasten the thermostat to a socket or an exterior
wall box by driving the screws through the holes
in each side of the thermostat.
• Put the frame on.
• Click the display module back in place.
Important: Do NOT press on the display screen when
clicking the display module back in place.
Installation Guide
11
Advertisement
Table of Contents
Need help?
Do you have a question about the DEVIreg Touch and is the answer not in the manual?
Questions and answers