Do you have a question about the USER MANUAL and is the answer not in the manual?
Questions and answers
glenda
January 25, 2025
Please help
Glenda
January 25, 2025
how to remove & store pads
1 comments:
Mr. Anderson
February 10, 2025
To remove and store Auvon electrode pads:
1. Turn off the device by pressing the power button for a few seconds. 2. Grab a corner of the electrode pad and slowly peel it away from the skin. Do not pull the wire, and avoid touching the gel. 3. Place the sticky side of the pad on the transparent film or pad holder. 4. Gently remove the lead wire connector from the electrode pads. 5. Store the electrode pads in the storage bag and reseal tightly to prevent drying out. 6. Keep them at room or cool temperature (5°C-35°C/41°F-95°F) and away from direct sunlight. 7. Organize the wires with a cable tie and store everything in the pouch.
Need help?
Do you have a question about the USER MANUAL and is the answer not in the manual?
Questions and answers
Please help
how to remove & store pads
To remove and store Auvon electrode pads:
1. Turn off the device by pressing the power button for a few seconds.
2. Grab a corner of the electrode pad and slowly peel it away from the skin. Do not pull the wire, and avoid touching the gel.
3. Place the sticky side of the pad on the transparent film or pad holder.
4. Gently remove the lead wire connector from the electrode pads.
5. Store the electrode pads in the storage bag and reseal tightly to prevent drying out.
6. Keep them at room or cool temperature (5°C-35°C/41°F-95°F) and away from direct sunlight.
7. Organize the wires with a cable tie and store everything in the pouch.
This answer is automatically generated
Need manual for tens unit model number TA3224
Description on what each modes is/does?