After Use - Auvon USER MANUAL User Manual

10. Press and hold the
Center button for 3 sec-
onds to lock the device,
then the intensity, mode,
and time can't be ad-
justed. Press the center
button
a g a i n t o u n l o c k t h e
screen.
NOTE: Do not move
the electrode pads or
remove the lead wires
during the use, or you
may be shocked.

4.3 After Use

1. Turn off the device by pressing the power button
for seconds.
2. Grab a corner of the electrode pad and slowly peel
it away from the skin,
do not pull the wire, and avoid touching the gel as
much as possible.
3. Place the sticky side of the pad on the transparent
film or pad holder and remove the lead wire connec-
tor from the electrode pads gently.
4. Store the electrode pads in the storage bag and
reseal tightly to prevent them from dry-out. Store
them at room or cool temperature (between 5 °C-35
°C/41°F-95°F) and keep out of direct sunlight.
5. Organize the wires with the cable tie and store all
of them in the pouch for the store.
for 3 seconds
Email： support@iauvon.com
15