Table of Contents
Advertisement
Email： support@iauvon.com
4. Operating Instructions
4.1 Note Before Use
● Do not use this device during charging.
● When the device has no output and no operation, it
will shut down automatically in 5 minutes.
● You may experience tingling, trembling, or muscle
pulling when using the device depending on the
mode you choose, so please try out all the modes
and select the one that's most comfortable for you.
● For initial use, the intensity should be set between
1-3. If you feel the intensity is weak in 1-2 minutes,
gradually increase it and select the most comfortable
setting.
● It is recommended to use the device for 20-30
minutes and to stop using it when pain is relieved.
4.2 How to Use
1. Clean and dry the application area, and do not
attach electrode pads to the hairy and broken
skin.
TIP: use it on the hairless, no oil and no sweat
part, or it will reduce the pads' adhesion.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the USER MANUAL and is the answer not in the manual?
Questions and answers
Please help
how to remove & store pads
To remove and store Auvon electrode pads:
1. Turn off the device by pressing the power button for a few seconds.
2. Grab a corner of the electrode pad and slowly peel it away from the skin. Do not pull the wire, and avoid touching the gel.
3. Place the sticky side of the pad on the transparent film or pad holder.
4. Gently remove the lead wire connector from the electrode pads.
5. Store the electrode pads in the storage bag and reseal tightly to prevent drying out.
6. Keep them at room or cool temperature (5°C-35°C/41°F-95°F) and away from direct sunlight.
7. Organize the wires with a cable tie and store everything in the pouch.
This answer is automatically generated
Need manual for tens unit model number TA3224
Description on what each modes is/does?