Table of Contents
Advertisement
1.4
Manufacturer of the
product
Person responsible
for the product
1.5
8
Responsibilities
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica
Geosystems, is responsible for supplying the product, including the User
Manual and original accessories, in a safe condition.
The person responsible for the product has the following duties:
To understand the safety instructions on the product and the instructions
•
in the User Manual
To ensure that it is used in accordance with the instructions
•
To be familiar with local regulations relating to safety and accident pre-
•
vention
To stop operating the system and inform Leica Geosystems immediately if
•
the product and the application become unsafe
To ensure that the national laws, regulations and conditions for the oper-
•
ation of the product are respected
To ensure that the radio modem is not operated without the permission
•
of the local authorities on frequencies and/or output power levels other
than those specifically reserved and intended for use without a specific
permit. The internal and external radio modems have been designed to
operate on frequency ranges and output power ranges, the exact use of
which differs from one region and/or country to another.
WARNING
Unqualified installation on building or construction machinery
This may result in personal and material damage.
Precautions:
▶
Only an appropriately trained and qualified specialist may install this
product on building or construction machinery.
Hazards of Use
CAUTION
Unsuitable installation location
Installing near mechanically moving machine components may damage the
product.
Precautions:
▶
Deflect the mechanically moving machine components as far as possible
and define a safe installation zone.
NOTICE
Dropping, misusing, modifying, storing the product for long periods or
transporting the product
Watch out for erroneous measurement results.
Precautions:
▶
Periodically carry out test measurements and perform the field adjust-
ments indicated in the User Manual, particularly after the product has
been subjected to abnormal use as well as before and after important
measurements.
Safety Directions
Advertisement
Table of Contents
