Table of Contents
Advertisement
3.3
Insert and remove
a USB data storage
device step-by-step
Preconditions for
using USB Memory
devices
3.4
☞
22
Using USB Memory Devices
0020460_002
Ensure the instrument is placed in its fixed position or place it onto
☞
a stable surface.
1.
Unscrew the cap from the USB port.
2.
Plug in the USB adapter cable.
3.
Slide the USB data storage device firmly into the USB host port until
it clicks into position.
Take care not to damage the USB data storage device when moving
☞
the iCON aps 200 or when handling around the device.
Remove the adaptor cable and close the USB port cover when no
☞
USB data storage device is used.
USB Memory devices must be formatted in the FAT or FAT32 format.
☞
To import data from a USB Memory device to the iCON aps 200 appropriate
folders must be created on the USB device and the files placed in the correct
folder.
Folder
[CoordinateSystems]
[User]
[System]
Installation on a Machine
In general, all installation works must be done by a dedicated installation spe-
cialist. Please contact the local selling unit or dealer for further information.
The installation information within this User Manual is indicated to increase
the operators understanding of the system and its maintaining.
Files to be placed
Cordinate system files
User files
Antenna and/or System Configuration files
Using iCON aps 200
Advertisement
Table of Contents
