Table of Contents
Advertisement
6
6.1
Transport in the field
Transport in a road
vehicle
Shipping
Shipping, transport of
batteries
6.2
Product
6.3
Product and
accessories
Damp products
Cables and plugs
Connectors with dust
caps
42
Care and Transport
Transport
When transporting the equipment in the field, always make sure that you carry
the product in its original container.
Never carry the product loose in a road vehicle, as it can be affected by shock
and vibration. Always carry the product in its container and secure it.
For products for which no container is available use the original packaging or
its equivalent.
When transporting the product by rail, air or sea, always use the complete
original Leica Geosystems packaging, container and cardboard box, or its equi-
valent, to protect against shock and vibration.
When transporting or shipping batteries, the person responsible for the
product must ensure that the applicable national and international rules and
regulations are observed. Before transportation or shipping, contact your local
passenger or freight transport company.
Storage
Respect the temperature limits when storing the equipment, particularly in
summer if the equipment is inside a vehicle. Refer to
information about temperature limits.
Cleaning and Drying
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten
•
the cloth with water or pure alcohol. Do not use other liquids; these may
attack the polymer components.
0024481_001
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the
connecting cables.
Wet connectors must be dry before attaching the dust cap.
Dry the product, the transport container, the foam
inserts and the accessories at a temperature not
greater than 40 °C/104 °F and clean them. Remove
the battery cover and dry the battery compartment.
Do not repack until everything is dry. Always close
the transport container when using in the field.
7 Technical Data
for
Care and Transport
Advertisement
Table of Contents
