Connecting To A Pc; Connecting Unit Directly To The Pc (When Using Only One Unit); Connecting Units Through A Switching Hub (When Us- Ing Multiple Units) - Kikusui PFX2731S Operation Manual

Connecting to a PC

Connect this product to the PC via the LAN interface and assign an IP address.
You can connect directly (a single unit) or connect through a switching hub (multiple units).
Connecting unit directly to the PC (when using only one
unit)
You can connect this product directly to the PC using a LAN cable. You can use up to six channels.
Connecting units through a switching hub (when using
multiple units)
If you will use multiple units, use LAN cables to connect them to the PC through a switching hub.
Use the LAN cable (STP cable) shielded with a material that is insensitive to noise and electromagnetic
waves.
One PC is capable of supporting up to four units and 24 channels.
 Recommended switching hubs
Model
IESH-MB205-R
IESH-MB208-R
PFX2731S
To the LAN port
PC
Manufacturer Number of
ports
Misumi 5
Misumi 8
LAN cable (straight)
PFX2731S
To the LAN port
Notes
Data rate: 10/100 Mbps
Latency: 3924 ns (for 64 bytes bucket)
Buffer size: 768 kbit
Communication protocol: 10BASE-T/100BASE-TX,
CATE5Estraight (CATE5E cross is also available.)
Maximum transmission distance: 100 m
Preparation
Operation Manual
17