Troubleshooting; Warranty; Disposal - Dometic BUTTNER MT iQ Solar Monitor III Installation And Operating Manual

MT iQ Solar Monitor III
11

Troubleshooting

Fault
The solar monitor does not work.
No values are measured.
Weird characters are displayed.
12

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the
product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the
warranty.
13

Disposal

Recycling packaging material
➤ Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
Recycling products with non-replaceable batteries, rechargeable batteries or light
sources
➤ If the product contains any non-replaceable batteries, rechargeable batteries or
light sources, you don't have to remove them before disposal.
➤ If you wish to finally dispose of the product, ask your local recycling center or spe-
cialist dealer for details about how to do this in accordance with the applicable dis-
posal regulations.
➤ The product can be disposed free of charge.
Deleting personal data
EN
Solution
➤ Check the right polarity of the house battery.
➤ Check the solar charger fuse.
➤ Check the house battery voltage (>7 V).
➤ Check the connection cable for insulation faults, breaks
or loose connections.
1. Disconnect the solar monitor from the solar charger by
unplugging the connection cable on the solar monitor.
2. Wait at least 10 seconds before reconnecting the con-
nection cable.
Troubleshooting
21