Dometic BUTTNER MT iQ Solar Monitor III Installation And Operating Manual page 15

MT iQ Solar Monitor III
Setting the start timer
1. Press the button to display time and date.
2. Press and hold the
✔ "Set" flashes.
3. Press the button until "Set On" flashes.
Setting the end timer
8. Adjust the LED back light (chapter "Setting the LED back light" on page 16) or press the
button to save the settings.
EN
button for 3 seconds to open the settings menu.
4. Set the hour and the minutes. Use the
the value and the
5. Press the
✔ The start timer is set.
✔ "Set Off" flashes.
6. Set the hour and the minutes. Use the
the value and the
7. Press the
✔ The end timer is set.
✔ "Set LEd" is displayed.
button to increase the value.
button to save each setting.
button to increase the value.
button to save each setting.
Using the solar monitor
button to decrease
button to decrease
15