Mounting The Concept / Verify Tonearm - Clearaudio concept User Manual

User manual / Bedienungsanleitung
3. Mounting the
Pic. 4: Assembling the clamping base
Pic. 5: Mounting the tonearm
Pic. 6: Locking the tonearm
Made in Germany
concept / Verify
tonearm
Take the clamping ring and place it on the
recess in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws.
Make sure that the side hole of the clamping
ring remains accessible (see Pic. 4).
First insert the tonearm cable and then the
tonearm foot of the
into the hole of the clamping ring (Pic. 5).
Now fix the tonearm with the screws and
the hex wrench. Do not over-tighten for later
adjustments (Pic. 6)!
concept / Verify
tonearm
Page / Seite 9