Analog Devices EVAL-AD5413SDZ User Manual page 5

EVAL-AD5413SDZ Evaluation Board User Guide UG-1757
9. Write the initial configuration values to clear these error
flags. If the device is power cycled, or if the USB cable is
disconnected and reconnected while the ACE software is
open, contact with the EVAL-AD5413SDZ is lost. To regain
contact, click the System tab, click the USB symbol on the
SDP-S, and then click Acquire (see Figure 6).
Figure 6. Reconnecting the USB
Figure 7. AD5413 Block Diagram in the ACE Software
Rev. 0 | Page 5 of 17