Instructions for Use
Removing The Adapter
To remove the adapter:
1. Press and hold the adapter QUICK RELEASE button while pulling the adapter off of
the power stapling handle.
2. Refer to the specific adapter Instructions for Use for Cleaning and Sterilizing
instructions.
Removing The Power Shell And Power Handle
WARNING
The power handle cannot be sterilized.
PRECAUTION
The power handle will continue to drain power from the battery as long as it
remains attached to the power shell. Upon completion of use and disinfection,
return the used power handle to the battery charger station.
WARNING
The power shell is single-use only. DISCARD AFTER USE. DO NOT STERILIZE. Re-
sterilized or reprocessed sterile power shells will not function.
1. Open the power shell by first releasing the side secure clips.
2. While holding the back of the power shell, press the bottom release button down
and push under the latch to open the power shell.
3. With clean gloves, securely remove the power handle from the power shell and
place it in a clean environment.
4. Discard the used power shell.
5. Follow the disinfection instructions for the power handle in the Cleaning section.
32
Need help?
Do you have a question about the Signia Stapling System and is the answer not in the manual?