Covidien Signia Stapling System User Manual page 16

System Overview
Table 12: Signia™ Stapler Firing Progress Indicators -
Reload travel distance indicators will display when using compatible Endo GIA™
single-use reloads and Endo GIA™ single-use reloads with Tri-Staple™ Technology.
Additional Controls Indicators
The Signia™ stapler's power rotation controls are preset ON as ambidextrous, but can
be configured for dedicated right- or left-handed use. Configuring rotation buttons
can occur at any time once a Signia™ adapter is attached.
NOTE
The configuration will clear once the power pack is returned to the charger.
Disable/Re-Enable Rotation Button Controls
1. Disable or re-enable rotation controls by pressing and holding both rotation buttons
on one side of the handle for three seconds. The screen will show deactivation or
reactivate countdown and change to its active status (see Table 13).
2. Pressing a single disabled rotation control will display the current disabled and
active status.
(e.g., using a 60 mm reload).
1 2
10
3