Care And Maintenance - Titan TTB910SDR Manual

TTB910SDR by TITAN
UK plug
If you need to replace the fitted plug, then follow the instructions belo .
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
Connect
Blue to
N(Neutral)
Outer sleeve
firmly clampe
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
Only fit an approved 5 Amp BS 1363 or BS 1363/A plug and the correctly rated
fuse. If in doubt, consult a qualified electrician
NOTE: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.

Care and maintenance

5 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
GB
IE
31