Supermicro H13DSH User Manual page 78

H13DSH User's Manual
Reset To Setup Mode
Enroll Efi Image
This feature is to enroll SHA256 hash of the binary into the Authorized Signature Data-
base (DB) and to allow the image to run in the secure boot mode.
Export Secure Boot Variables
Use this feature to export NVRAM content of secure boot variables to files in a root folder
on a file system device.
Secure Boot Variable/Size/Key Numbers/Key Source
Platform Key (PK)
This feature allows the user to enter and configure a set of values to be used as platform
firmware keys for the system. The sizes, keys numbers, and key sources of the platform
keys will be indicated as well. Select Update to update the platform key. Select Yes to
load a factory default PK or No to load from a file on an external media.
Key Exchange Keys (KEK)
This feature allows the user to enter and configure a set of values to be used as Key-
Exchange-Keys for the system. The sizes, keys numbers, and key sources of the Key-
Exchange-Keys will be indicated as well. Select Update to update your "Key Exchange
Keys". Select Append to append your "Key Exchange Keys".
Authorized Signatures (db)
This feature allows the user to enter and configure a set of values to be used as Autho-
rized Signatures for the system. These values also indicate the sizes, keys numbers,
and the sources of the authorized signatures. Select Update to update your "Authorized
Signatures". Select Append to append your "Authorized Signatures". The settings are
Update, and Append.
78