Supermicro H13DSH User Manual page 77

Secure Boot
This section contains options and menus for securing your boot mode and for key management.
Secure Boot
This option allows you specify when the Platform Key (PK) is enrolled. When enabled, the
System Mode is user deployed, and the CSM function is disabled. Options include Disabled
and Enabled.
Secure Boot Mode
Use this item to select the secure boot mode. The options are Standard and Custom.
CSM Support
Select Enabled to support the EFI Compatibility Support Module (CSM), which provides
compatibility support for traditional legacy BIOS for system boot. The options are Disabled
and Enabled.
Enter Audit Mode
Enter Deployed Mode
Transition between Deployment and User Modes
Key Management
This submenu allows the user to configure the following Key Management settings.
Vendor Keys
Provision Factory Defaults
Install factory default Secure Boot keys after the platform reset and while the System is in
Setup mode. The default setting is Disabled.
Restore Factory Keys
Select and press Yes to restore factory default secure boot keys and key variables. Also,
it will reset the system to the User mode. Select Yes to install all default secure keys set
by the manufacturer. The options are Yes and No.
77
Chapter 4: BIOS