Table of Contents
Advertisement
4. Select the correct boiler model from the provided list (Fig.4.3).
The boiler name is found on the data badge and front panel name plate (Ref.1, Fig. 4.8).
Choose the Wi-Fi* network you want to connect the Gateway receiver to and enter the correct password. After connection
to the Cloud, a message will indicate the presence of a new Smartech, press 'Next' and enter the name you want to give to
your Smartech (Fig.4.4). Complete the installation by following the screen guides.
*Smartech Plus is compatible with the frequency 2.4GHz 802.11b/g/n.
If you have a dual-band router, 2.4GHz and 5GHz, Smartech can only be connected to 2.4GHz networks. In the event of
frequently losing connection, it is recommended to create a 2.4GHz host network that Smartech can be connected to and
any zone expansions. The host network must not require any web login.
Fig. 4.3
Fig. 4.4
Alpha Smartech Plus - Start-Up
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Smartech Plus and is the answer not in the manual?
Questions and answers